Factory Cheap Hot Used Plastic Injection Molding Machine - EIPC6 Pump – Vega Electronic
Factory Cheap Hot Used Plastic Injection Molding Machine - EIPC6 Pump – Vega Electronic Detail:
Internal gear pump Type EIPC6 for industrial applications with constant displacement volume
• Internal gear pump with axial and radial
• Radial compensation with segments
• Suction and pressure port radial
• Field of application: Industrial hydraulic
• Low noise
• Long time life
• Low pulsation (pressure pulsation ~2 %)
• Multi flow combinations on request
|Spec. volume Vth [cm3/rev]***||125,7||160,1||200,9||249,9|
|Continuous operating pressure [bar]**||250||160||140|
|Peak operating pressure [bar] max. 10 sec 15 % duty cycle**||280||170||150|
|Cut-in pressure peak [bar]**||300||180||160|
|Nominal speed [min-1]****||400 – 2.500||400 – 2.000|
|Max. speed [min-1]||2.800||2.200|
Operating viscosity [mm2/s] 10 – 300
|Starting viscosity [mm2/s]||2.000|
|Operating temperature [°C]||-20 to +100|
|Operating medium||HL – HLP DIN 51 524|
|Max. medium temperature [°C]||80|
|Min. medium temperature [°C]||-20|
|Max. ambient temperature [°C]||80|
|Min. ambient temperature [°C]||-20|
|Max. admission pressure (intake side) [bar]||2 bar absolute|
|Min. admission pressure (intake side) [bar]||0.8 bar absolute (Start 0.6)|
|Weight appr. [kg]||27,5||30||43||54|
|Degree of filtration||Class 20/18/15 due to ISO 4406|
|Life expectancy||not less than 1x 107 load cycles against peak operating pressure|
|Efficiency η vol:||94||94||93||93|
|Efficiency η hm:||90||91|
(measured in sound chamber) dB[A]
n = 1.450 min-1 Δ p = 250 bar (160 bar at size 200 and 140 bar at size 250) T = 50 °C Medium: HLP 46
** For acceptable pressure at 400–1.800 rpm. Further rpm on request.
*** Due to manufacturing tolerances the displacement volume could vary.
**** Further rpm on request.
The pumps have no corrosion protection. The max. permissible values must not be applied cumulatively. Please contact us.
Product detail pictures:
Related Product Guide:
New LSR technology showcased at Compamed | Clf Injection Moulding Machine
20 Dizzying Photos Of Aircraft Instrument Clusters | Hydraulic Gauges
We are proud of the superior customer gratification and wide acceptance due to our persistent pursuit of top of the range both of those on merchandise and service for Factory Cheap Hot Used Plastic Injection Molding Machine - EIPC6 Pump – Vega Electronic, The product will supply to all over the world, such as: Romania , Brazil , Egypt , With the superior and exceptional service, we are well developed along with our customers. Expertise and know-how ensure that we are always enjoying the trust from our customers in our business activities. "Quality", "honesty" and "service" is our principle. Our loyalty and commitments remain respectfully at your service. Contact Us Today For further information, contact us now.
By Eileen from Azerbaijan - 2016.08.18 11:04
It is really lucky to meet such a good supplier, this is our most satisfied cooperation, I think we will work again!
By Elma from Swiss - 2016.08.21 14:13