Factory supplied Servo System - EIPC5 Pump – Vega Electronic
Factory supplied Servo System - EIPC5 Pump – Vega Electronic Detail:
Internal gear pump Type EIPC5 for industrial applications with constant displacement volume
Characteristics：
• Internal gear pump with axial and radial gap compensation
• Radial compensation with segments
• Suction and pressure port radial
• Field of application: Industrial hydraulic
• Low noise
• Long time life
• Low pulsation (pressure pulsation ~2 %)
• Multi flow combinations on request
Technical Data：
| Rated Size | 064 | 080 | 100 |
| Spec. volume Vth [cm3/rev]*** | 65,3 | 80,4 | 100,5 |
| Continuous operating pressure [bar]** | 250 | ||
| Peak operating pressure [bar] max. 10 sec 15 % duty cycle** | 270 | ||
| Cut-in pressure peak [bar]** | 280 | ||
| Nominal speed [min-1] | 100 – 2.800 | 100 – 2.800 | 100 – 2.500 |
| Max. speed [min-1] | 3.000 | 3.000 | 3.000 |
Operating viscosity [mm2/s] 10 – 300
| Starting viscosity [mm2/s] | 2.000 | ||
| Operating temperature [°C] | -20 to +100 | ||
| Operating medium | HL – HLP DIN 51 524 part 1/2 | ||
| Max. medium temperature [°C] | 120 | ||
| Min. medium temperature [°C] | -40 | ||
| Max. ambient temperature [°C] | 80 | ||
| Min. ambient temperature [°C] | -40 | ||
| Max. admission pressure (intake side) [bar] | 2 bar absolute | ||
| Min. admission pressure (intake side) [bar] | 0,8 bar absolute (Start 0,6) | ||
| Weight appr. [kg] |
11,5 |
13,0 | 13,5 |
| Degree of filtration | Class 20/18/15 due to ISO 4406 | ||
| Life expectancy | not less than 1x 107 load cycles against peak operating pressure | ||
| Efficiency η vol: |
94 |
95 | 95 |
| Efficiency η hm: |
92 |
93 | 93 |
| Pump noise* (measured in sound chamber) dB[A] |
69 |
70 | 71 |
n = 1.450 min-1 Δ p = 250 bar T = 50 °C Medium: HLP 46
* Measured in anechoic room of Eckerle Hydraulic Division; Axial microphone distance 1.0 m
** For acceptable pressure at 400–1.800 rpm. Further rpm on request.
*** Due to manufacturing tolerances the displacement volume could vary.
The pumps have no corrosion protection. The max. permissible values must not be applied cumulatively. Please contact us.
Product detail pictures:
Related Product Guide:
Twin Screw Extruders Market: Europe Exhibits Second-Largest Installed Base of Twin Screw Extruders | Clf Injection Moulding Machine
Malaysia Airlines flight emergency caused by plastic covers left on gauges | Rotary Injection Molding Machine
All we do is usually connected with our tenet " Consumer initial, Rely on 1st, devoting around the food stuff packaging and environmental safety for Factory supplied Servo System - EIPC5 Pump – Vega Electronic, The product will supply to all over the world, such as: Yemen , Zurich , Germany , To make every client satisfied with us and achieve win-win success, we will continue to try our best to serve and satisfy you! Sincerely looking forward to cooperating with more overseas customers based on mutual benefits and great future business. Thank you.
By Roberta
from Miami
- 2016.09.22 11:32
We always believe that the details decides the company's product quality, in this respect, the company conform our requirements and the goods are meet our expectations.
By Janice
from Serbia
- 2016.06.25 12:48
