Standert Molding Machine-VG100
| SPESIFIKASJE | VG100 | ||
| A | B | ||
| INJECTION UNIT | |||
| Screw Diameter | mm | 35 | 38 |
| Screw La / D Ration | L/D | 20.1 | 18.5 |
| Shotgrutte (teoretysk) | cm3 | 135 | 158 |
| Ynjeksjegewicht (PS) | g | 123 | 144 |
| Ynjeksje Rate | g/s | 76 | 90 |
| Ynjeksje druk | MPa | 237 | 201 |
| Screw Speed | rpm | 0-220 | |
| CLAMPING UNIT | |||
| Clamp tonnage | KN | 1000 | |
| Iepening stroke | mm | 305 | |
| Romte tusken Tie Bars | mm | 355*315 | |
| Max.Mold hichte | mm | 320 | |
| Min.Mold Hichte | mm | 150 | |
| Ejector Stroke | mm | 70 | |
| Ejector Tonnage | KN | 27 | |
| OTHERS | |||
| Max. Pomp druk | MPa | 16 | |
| Pomp Motor Power | KW | 11 | |
| Heater Power | KW | 5.3 | |
| Machine Ofmjitting (L * W * H) | m | 3,58*1,25*1,65 | |
| Machine Gewicht | t | 2.7 | |
| Oalje Tank Kapasiteit | L | 210 | |
| Platen Ofmjittings Face |  | ||
| Mold romte Ofmjittings |  | ||
| Machine Ofmjittings |  | ||
