Good User Reputation for Nozzles Injection Molding Machine - EIPC3 Pump – Vega Electronic
Good User Reputation for Nozzles Injection Molding Machine - EIPC3 Pump – Vega Electronic Detail:
Internal gear pump Type EIPC3 for industrial applications with constant displacement volume
Characteristics：
• Internal gear pump with axial and radial gap compensation
• Radial compensation with segments
• Suction and pressure port radial
• Field of application: Industrial hydraulic
• Low noise
• Long time life
• Low pulsation (pressure pulsation ~2 %)
• Multi flow combinations
Technical Data：
| Rated Size | 020 | 025 | 032 | 040 | 050 | 063 | 064 |
| Spec. volume Vth [cm3/rev]*** | 20,0 | 24,8 | 32,1 | 40,1 | 50,3 | 63,1 | 64,4 |
| Continuous operating pressure [bar]** | 250 | 180 | 250 | ||||
| Peak operating pressure [bar] max. 10 sec 15 % duty cycle** | 320 | 300 | 280 | 210 | 280 | ||
| Cut-in pressure peak [bar]** | 350 | 325 | 300 | 210 | 300 | ||
| Nominal speed [min-1] | 200 – 3.400 | 200 – 3.200 | 200 – 3.000 | 100 – 2.500 | 100 – 1.800 | 100 – 1.800 | |
| Max. speed [min-1] | 3.900 | 3.800 | 3.700 | 2.500 | 1.800 | 1.800 | |
| Nominal speed [min-1]**** | 100 – 3.200 | 100 – 3.000 | 200 – 2.200 | 100 – 2.200 | |||
| Max. speed [min-1]**** | 3.600 | 3.600 | 2.400 | 2.400 | |||
Operating viscosity [mm2/s] 10 – 300
| Starting viscosity [mm2/s] | 2.000 | ||||||
| Operating temperature [°C] | -20 to +100 | ||||||
| Operating medium | HL – HLP DIN 51 524 part 1/2 | ||||||
| Max. medium temperature [°C] | 120 | ||||||
| Min. medium temperature [°C] | -40 | ||||||
| Max. ambient temperature [°C] | 80 | ||||||
| Min. ambient temperature [°C] | -40 | ||||||
| Max. admission pressure (intake side) [bar] | 2 bar absolute | ||||||
| Min. admission pressure (intake side) [bar] | 0.8 bar absolute (Start 0.6) | ||||||
| Weight appr. [kg] | 8,3 | 8,6 | 9,2 | 9,8 | 10,5 | 5,4 |
11,5 |
| Degree of filtration | Class 20/18/15 due to ISO 4406 | ||||||
| Life expectancy | not less than 1x 107 load cycles against peak operating pressure | ||||||
| Efficiency η vol: | 93 | 93 | 94 | 95 | 95 | 94 |
95 |
| Efficiency η hm: | 91 | 92 | 92 | 93 | 93 | 92 |
93 |
| Pump noise*(measured in sound chamber) dB[A] | 62 | 63 | 64 | 65 | 66 | 64 |
68 |
n = 1.450 min-1 Δ p = 250 bar (180 bar at size 063) T = 50 °C Medium: HLP 46
* Measured in anechoic room of Eckerle Hydraulic Division; Axial microphone distance 1.0 m
** For acceptable pressure at 400–1.800 rpm. Further rpm on request.
*** Due to manufacturing tolerances the displacement volume could vary.
**** 2″ suction port
The pumps have no corrosion protection. The max. permissible values must not be applied cumulatively. Please contact us.
Product detail pictures:
Related Product Guide:
Comparing of AMETEK Inc. (AME) and Graco Inc. (NYSE:GGG) | Hydraulic Gauges
Donnelly Custom Manufacturing installs 70-ton Engel vertical rotary press | Clf Injection Moulding Machine
Our company aims to operating faithfully, serving to all of our customers , and working in new technology and new machine constantly for Good User Reputation for Nozzles Injection Molding Machine - EIPC3 Pump – Vega Electronic, The product will supply to all over the world, such as: Germany , luzern , Pakistan , We adopted technique and quality system management, based on "customer orientated, reputation first, mutual benefit, develop with joint efforts", welcome friends to communicate and cooperate from all over the world.
By Doris
from Philippines
- 2015.02.04 14:13
In China, we have purchased many times, this time is the most successful and most satisfactory, a sincere and realiable Chinese manufacturer!
By Monica
from Greek
- 2015.07.12 12:19
