HJK128 allura gyare-gyaren inji
| BAYANI | HJK128 Injection Molding Machine | |||
| A | B | C | ||
| RASHIN ALJANI | ||||
| Matsakaicin Diamita | mm | 40 | 42 | 45 |
| Rarraba L/D | L/D | 20.7 | 19.7 | 18.4 |
| Girman Harbin (Ka'idar) | cm3 | 220 | 248 | 278 |
| Nauyin allura (PS) | g | 200 | 225 | 253 |
| Yawan alluran | g/s | 102 | 110 | 125 |
| Matsin allura | MPa | 221 | 204 | 180 |
| Gudun dunƙulewa | rpm | 0-220 | ||
| RASHIN CLAMING | ||||
| Matsa ton | KN | 1280 | ||
| Bude bugun jini | mm | 360 | ||
| Tara Tsakanin Taye Bars | mm | 415*375 | ||
| Max.Mold Tsawo | mm | 400 | ||
| Tsawon Min. Mold | mm | 150 | ||
| Ejector Stroke | mm | 120 | ||
| Mai fitar da Tonnage | KN | 40 | ||
| WASU | ||||
| Matsakaicin Matsin Pump | MPa | 16 | ||
| Pump Motor Power | KW | 11 | ||
| Wutar lantarki | KW | 6.3 | ||
| Girman Injin (L*W*H) | m | 4.4*1.36*1.8 | ||
| Nauyin Inji | t | 3.8 | ||
| Karfin Tankin Mai | L | 220 | ||
| Fuskar Girman Platen |
| |||
| Mold Space Girma |
| |||
| Girman Injin |
| |||
Haijiang allura gyare-gyaren inji da High gudun jerin, makamashi ceto jerin, PET preform jerin, PVC jerin.
Don ƙarin cikakkun bayanai, da fatan za a iya tuntuɓar mu kyauta.
