HJK128 mīkini hoʻoheheʻe ʻia
| OLELO HOOLAHA | HJK128 Injection Molding Machine | |||
| A | B | C | ||
| HUI INJECTION | ||||
| Anawaena oka | mm | 40 | 42 | 45 |
| Uku L/D ʻai | L/D | 20.7 | 19.7 | 18.4 |
| Ka nui o ka pana (Theoretical) | knm3 | 220 | 248 | 278 |
| Kaumaha hoʻoheheʻe (PS) | g | 200 | 225 | 253 |
| Ka Laki Hoʻopiʻi | g/s | 102 | 110 | 125 |
| Paʻi ʻImi | MPa | 221 | 204 | 180 |
| Ka māmā holo | rpm | 0-220 | ||
| HUI PILI | ||||
| Paʻi kānana | KN | 1280 | ||
| Wehewehe ʻana | mm | 360 | ||
| Wahi ma waena o nā lāʻau paʻa | mm | 415*375 | ||
| Max.Mold Kiʻekiʻe | mm | 400 | ||
| Min.Mold Kiʻekiʻe | mm | 150 | ||
| ʻO ka hoʻokuke | mm | 120 | ||
| Ejector Tonnage | KN | 40 | ||
| NA MEA E ae | ||||
| Max.Pump Pressure | MPa | 16 | ||
| Pume Motor Power | KW | 11 | ||
| Mana Hoowela | KW | 6.3 | ||
| Ana Mīkini (L*W*H) | m | 4.4*1.36*1.8 | ||
| Kaumaha Mīkini | t | 3.8 | ||
| Ka nui o ka pahu aila | L | 220 | ||
| Nā Anana Pāpaʻa Maka |
| |||
| Nā ʻāpana ʻokoʻa |
| |||
| Nā Ana Mīkini |
| |||
Loaʻa i ka mīkini hoʻoheheʻe ʻia ʻo Haijiang i ka moʻo wikiwiki kiʻekiʻe, ka moʻo mālama ola, PET preform series, PVC serices.
No ka ʻike hou aku, e ʻoluʻolu e launa pū me mākou.
