Mesin Molding Injeksi Standar-VG120
| SPESIFIKASI | VG120 | ||
| A | B | ||
| UNIT INJEKSI | |||
| Diameter sekrup | mm | 40 | 42 |
| Screw La / D jatah | L/D | 20.5 | 19.8 |
| Ukuran Shot (Teori) | cm3 | 175 | 190 |
| Bobot injeksi (PS) | g | 160 | 175 |
| Tingkat injeksi | g/s | 95 | 100 |
| Tekanan Injeksi | MPa | 201 | 186 |
| Kacepetan meneng | rpm | 0-220 | |
| UNIT KAMPUNG | |||
| Clamp tonase | KN | 1200 | |
| Pambuka stroke | mm | 318 | |
| Spasi Antarane Tie Bars | mm | 385*350 | |
| Max.Mold Dhuwur | mm | 400 | |
| Min.Mold Dhuwur | mm | 150 | |
| Stroke Ejector | mm | 80 | |
| Ejector Tonnage | KN | 30 | |
| LAIN | |||
| Max. Tekanan Pompa | MPa | 16 | |
| Daya Motor Pompa | KW | 11 | |
| Daya Pemanas | KW | 5.5 | |
| Ukuran Mesin (L * W * H) | m | 4.0*1.36*1.72 | |
| Bobot Mesin | t | 3.6 | |
| Kapasitas Tangki Minyak | L | 210 | |
| Platen Dimensi pasuryan |  | ||
| Mold Space Dimensi |  | ||
| Dimensi Mesin |  | ||
