Mesin Molding Injeksi Standar-VG50
| SPESIFIKASI | VG50 | ||
| A | B | ||
| UNIT INJEKSI | |||
| Diameter sekrup | mm | 28 | 32 |
| Screw La / D jatah | L/D | 20 | 17.5 |
| Ukuran Shot (Teori) | cm3 | 63 | 82 |
| Bobot injeksi (PS) | g | 57 | 73 |
| Tingkat injeksi | g/s | 55 | 66 |
| Tekanan Injeksi | MPa | 168 | 129 |
| Kacepetan meneng | rpm | 0-175 | |
| UNIT KAMPUNG | |||
| Clamp tonase | KN | 500 | |
| Pambuka stroke | mm | 240 | |
| Spasi Antarane Tie Bars | mm | 280*260 | |
| Max.Mold Dhuwur | mm | 300 | |
| Min.Mold Dhuwur | mm | 140 | |
| Stroke Ejector | mm | 55 | |
| Ejector Tonnage | KN | 18 | |
| LAIN | |||
| Max. Tekanan Pompa | MPa | 16 | |
| Daya Motor Pompa | KW | 5.5 | |
| Daya Pemanas | KW | 3.1 | |
| Ukuran Mesin (L * W * H) | m | 2.6*0.75*1.37 | |
| Bobot Mesin | t | 1.5 | |
| Kapasitas Tangki Minyak | L | 190 | |
| Platen Dimensi pasuryan |  | ||
| Mold Space Dimensi |  | ||
| Dimensi Mesin |  | ||
