Renewable Design for Injection Molding Machine Oil Filter - EIPC6 Pump – Vega Electronic
Renewable Design for Injection Molding Machine Oil Filter - EIPC6 Pump – Vega Electronic Detail:
Internal gear pump Type EIPC6 for industrial applications with constant displacement volume
• Internal gear pump with axial and radial
• Radial compensation with segments
• Suction and pressure port radial
• Field of application: Industrial hydraulic
• Low noise
• Long time life
• Low pulsation (pressure pulsation ~2 %)
• Multi flow combinations on request
|Spec. volume Vth [cm3/rev]***||125,7||160,1||200,9||249,9|
|Continuous operating pressure [bar]**||250||160||140|
|Peak operating pressure [bar] max. 10 sec 15 % duty cycle**||280||170||150|
|Cut-in pressure peak [bar]**||300||180||160|
|Nominal speed [min-1]****||400 – 2.500||400 – 2.000|
|Max. speed [min-1]||2.800||2.200|
Operating viscosity [mm2/s] 10 – 300
|Starting viscosity [mm2/s]||2.000|
|Operating temperature [°C]||-20 to +100|
|Operating medium||HL – HLP DIN 51 524|
|Max. medium temperature [°C]||80|
|Min. medium temperature [°C]||-20|
|Max. ambient temperature [°C]||80|
|Min. ambient temperature [°C]||-20|
|Max. admission pressure (intake side) [bar]||2 bar absolute|
|Min. admission pressure (intake side) [bar]||0.8 bar absolute (Start 0.6)|
|Weight appr. [kg]||27,5||30||43||54|
|Degree of filtration||Class 20/18/15 due to ISO 4406|
|Life expectancy||not less than 1x 107 load cycles against peak operating pressure|
|Efficiency η vol:||94||94||93||93|
|Efficiency η hm:||90||91|
(measured in sound chamber) dB[A]
n = 1.450 min-1 Δ p = 250 bar (160 bar at size 200 and 140 bar at size 250) T = 50 °C Medium: HLP 46
** For acceptable pressure at 400–1.800 rpm. Further rpm on request.
*** Due to manufacturing tolerances the displacement volume could vary.
**** Further rpm on request.
The pumps have no corrosion protection. The max. permissible values must not be applied cumulatively. Please contact us.
Product detail pictures:
Related Product Guide:
Long Fiber Thermoplastics (LFT) Market Research 2019-2024 | Analysis of Import-Export, Consumption Value in Development | Clf Injection Moulding Machine
Global Low Pressure Molding Machine Market Size, Status And Forecast 2025 | Low Pressure Injection Molding Machine
Our corporation has been specializing in brand strategy. Customers' gratification is our greatest advertising. We also source OEM company for Renewable Design for Injection Molding Machine Oil Filter - EIPC6 Pump – Vega Electronic, The product will supply to all over the world, such as: El Salvador , Nicaragua , Senegal , "Good quality, Good service " is always our tenet and credo. We take every effort to control the quality, package, labels etc and our QC will check every detail during producing and before shipment. We have been willing to establish long business relationship with all those who seek the high quality products and good service. We've got set up a wide sales network across European countries, North of America, South of America, Middle East, Africa, East Asia countries.Please contact us now, you will find our expert experience and high quality grades will contribute to your business.
By Louis from California - 2016.12.09 14:01
In China, we have purchased many times, this time is the most successful and most satisfactory, a sincere and realiable Chinese manufacturer!
By Odelia from Hyderabad - 2015.02.12 14:52