Standard Injection Molding Machine-VG50
| KUTAURA | VG50 | ||
| A | B | ||
| Jekiseni UNIT | |||
| Screw Diameter | mm | 28 | 32 |
| Screw La/D Ration | L/D | 20 | 17.5 |
| Shot size (Theoretical) | cm3 | 63 | 82 |
| Jekiseni Weight(PS) | g | 57 | 73 |
| Jekiseni Rate | g/s | 55 | 66 |
| Injection Pressure | MPa | 168 | 129 |
| Kukurura Speed | rpm | 0-175 | |
| CLAMPING UNIT | |||
| Clamp tonnage | KN | 500 | |
| Kuvhura sitiroko | mm | 240 | |
| Nzvimbo Pakati peTie Bars | mm | 280*260 | |
| Max.Mold Height | mm | 300 | |
| Min.Mold Height | mm | 140 | |
| Ejector Stroke | mm | 55 | |
| Ejector Tonnage | KN | 18 | |
| VAMWE | |||
| Max.Pump Pressure | MPa | 16 | |
| Pump Motor Power | KW | 5.5 | |
| Heater Power | KW | 3.1 | |
| Muchina Dimension(L*W*H) | m | 2.6*0.75*1.37 | |
| Machine Weight | t | 1.5 | |
| Oiri Tangi Kukwanisa | L | 190 | |
| Platen Dimensions Face |  | ||
| Mold nzvimbo Dimensions |  | ||
| Machine Dimensions |  | ||
