Mochini oa ho bopa ente oa HJK128
| TS'ELISO | HJK128 Ente Mochining Molding Machine | |||
| A | B | C | ||
| PHAKOANA E ENTO | ||||
| Screw Diameter | mm | 40 | 42 | 45 |
| Screw L/D Ration | L/D | 20.7 | 19.7 | 18.4 |
| Boholo ba Shot(Teoritical) | cm3 | 220 | 248 | 278 |
| Boima ba Ente(PS) | g | 200 | 225 | 253 |
| Sekhahla sa Ente | g/s | 102 | 110 | 125 |
| Khatello ea Ente | MPa | 221 | 204 | 180 |
| Screw Speed | rpm | 0-220 | ||
| KEKETSO MOTHO | ||||
| Lithane tse kokobetsang | KN | 1280 | ||
| Ho bula setorouku | mm | 360 | ||
| Sebaka Pakeng tsa Li-Tie Bars | mm | 415*375 | ||
| Max.Mold Height | mm | 400 | ||
| Min.Mold Height | mm | 150 | ||
| Ejector Stroke | mm | 120 | ||
| Ejector Tonnage | KN | 40 | ||
| BA BANG | ||||
| Khatello e phahameng ea Pompo | MPa | 16 | ||
| Pump Motor Power | KW | 11 | ||
| Matla a ho futhumatsa | KW | 6.3 | ||
| Boemo ba Mochini(L*W*H) | m | 4.4*1.36*1.8 | ||
| Boima ba Mochini | t | 3.8 | ||
| Bokhoni ba Tanka ea Oli | L | 220 | ||
| Sefahleho sa Platen Dimensions |
| |||
| Mould sebaka Litekanyo |
| |||
| Litekanyo tsa Mochini |
| |||
Mochini oa ho bopa ente ea Haijiang o na le letoto le phahameng la lebelo, letoto la ho boloka matla, letoto la li-PET preform, li-PVC serice.
Bakeng sa lintlha tse ling, ka kopo ikutloe u lokolohile ho ikopanya le rona.
