HJK128 mesin suntik molding
| SPESIFIKASI | HJK128 suntik molding Mesin | |||
| A | B | C | ||
| UNIT INJEKSI | ||||
| Diaméterna screw | mm | 40 | 42 | 45 |
| Screw L / D jatah | L/D | 20.7 | 19.7 | 18.4 |
| Ukuran Shot (Teoritis) | cm3 | 220 | 248 | 278 |
| Beurat suntik (PS) | g | 200 | 225 | 253 |
| Laju suntik | g/s | 102 | 110 | 125 |
| Tekanan suntik | MPa | 221 | 204 | 180 |
| Speed screw | rpm | 0-220 | ||
| UNIT CLAMPING | ||||
| Clamp tonase | KN | 1280 | ||
| Stroke bubuka | mm | 360 | ||
| Spasi Antara dasi Bar | mm | 415*375 | ||
| Max.kapang Jangkungna | mm | 400 | ||
| Min.kapang Jangkungna | mm | 150 | ||
| Stroke Ejector | mm | 120 | ||
| Ejector Tonnage | KN | 40 | ||
| LAIN | ||||
| Max.Tekanan Pompa | MPa | 16 | ||
| Pompa Motor Power | KW | 11 | ||
| Daya Pamanas | KW | 6.3 | ||
| Ukuran Mesin (L * W * H) | m | 4.4*1.36*1.8 | ||
| Beurat Mesin | t | 3.8 | ||
| Kapasitas Tangki Minyak | L | 220 | ||
| Platen Dimensi Nyanghareupan |
| |||
| Dimensi spasi kapang |
| |||
| Dimensi Mesin |
| |||
Haijiang mesin suntik molding gaduh runtuyan speed High, runtuyan hemat energi, piaraan preform runtuyan, PVC serices.
Pikeun leuwih jéntré, mangga ngarasa bébas ngahubungan kami.
