Top Suppliers Plastic Injection Moulding Machine Spare Parts - Pipe Joint Bypass Filter Group-BK Series – Vega Electronic
Top Suppliers Plastic Injection Moulding Machine Spare Parts - Pipe Joint Bypass Filter Group-BK Series – Vega Electronic Detail:
Pipe Joint Bypass Filter Group-BK Series
Type: Offline high-pressure oil return bypass filter
Filter Area ：0.316㎡
Inlet Pressure: 0.7~32Mpa
Return Pressure: T≤0.5MPa (Only with differential pressure indicator model)
Filter Flux: Max 3 L/Min
Operating Temperature:-20～120 ℃
Working Viscosity: 1～680 cSt
Filter Weight:2 Kg
Port size:Inlet P-1/4 PT
Flux:≤2L/Min Return:T-1/4 PT
Flux: ＞2L/Min Return:T-3/8 PT
Glass fiber filter , never deformation and metamorphism
Inlet port anti-clogging design, ensure long-term filtration work
Differential pressure alarm shows the filter life clearly
Flow control stability, filter effect significantly
Small,light and easy to install
Large filter area ﹑ more pollutants ﹑ long filter life.
Easy to maintain and replace the filter jar
Applicable to mineral oil &hydraulic oil, lubricants and so on.
Installation of self-high pressure and return hose and its joints, in order to reduce the back pressure ,the oil return pipe hole diameter no less than 8mm, the length within 2 meters is better.
With differential pressure indicator alarm device filter outlet T, available pressure pipe directly connected to the oil valve plate return oil T port
, Only pay attention to oil valve plate T oil pressure is not exceed 0.5MPa.
Pressure gauge filter outlet T tubing only available in the rated flow without back pressure connected. Replace the filter tank when the pressure gauge shows 2.5 bar or change the filter tank every year on time.
Please follow the instructions printed on the jar when making replacement.
Please treatment for environment protection when abandoned the obsolete jars.
Flow Control Valve
Oil pressure changes, the stability of the control oil to the constant rated flow
Differential Pressure Indicator
Visual or electronically controlled indicator is not affected by the back pressure,when the filter element need to be replace it will output signal correctly.
Easy to install in filter
Bracket Lock Net
The filter can be fixed on the bracket at the swing angle.
Rotary filter easy replace
Protect the filter when the up-down over-pressure bypass oil return tank
Precision glass fiber filter element
Glass fiber filter folded structure provides maximum dirt holding area, and difficult to deformation and metamorphism, long-term durability.
Dynamic filter spool
≥0.8mm solid particles are stopped to take in the former, prevented from entering the flow control valve blockage.
For the system of high pressure or oil return filter has pressure loss;And bypass filter has flux loss.There is a difference between the two.Especially the smaller flow oil pump system,when use the bypass filter should insure the suitable flux to avoid the working flux insufficient.
Take Oil Point：
Oiling point must be the early part of the system pressure at a high pressure, high pressure hose or pipe connections available, and take place the following optional:
1.Oil out of point
2.Oil valve plate system pressure point
3.System pressure valve pressure sampling point
Attention:between the oil point and the filter can be considered the configuration needle valve, it is easy to replace the tank no need the machine pause.
Oil return point：
The choice of oil return and tubing configuration directly affect the efficiency of the filter, it can lead to leakage of oil or even misuse of filter life, the best is the filter back to the port at zero pressure.
1.the return point of oil groove.
2.the return point of oil valve plate(not suitable for the filter with pressure gage.)
Electronically controlled type ：
output mode single contact (normally open)
Contact load 10W/100Vdc 0.5A Max
Visual function red LED(only for S4&S5 option)
Power 24-36Vdc (only for S4&S5 option)
Output pressure 0.19-0.21MPa
Operating temperature -20℃-120℃
Insulation method water-proof
Electrical connection DIN43650 plug
Output mode mechanical blue to red indicator
Output pressure 0.19-0.21MPa
reset function Automatic reset
operating temperature -20℃-90℃
Insulation method show point water-proof
BK04 – 030 – F – B – N – 10 – X -S*
1 2 3 4 5 6 7
Filter Element Number: SP01-030-F
Filter Fineness 030 – 3μm（Please contact supplier for the others）
Material F- micro-glass fibres
Bypass pressure B – 0.25MPa
Rubber seal N- butyronitrile ;V-fluorine
Design number 10
Flux number X-1.5l/min;Y-2l/min;Z-3l/min(Please contact supplier for the others.)
Alarm Configuration S1-pressure gage ;S2-visual;S3-electric contact;
S4-electric contact with light(OV concurrent);S5-electric contact with light(+24V concurrent)
Product detail pictures:
Related Product Guide:
Global Robotic Injection Molding Machine Market Cost Analysis, Regions, Key Players, Manufacturers Analysis, Price and Gross Margin by 2023 | Used Krauss Maffei Injection Molding Machine
KraussMaffei reveals equipment role in BMW i3 production : CompositesWorld | Hydraulic Gauges
We take pleasure in a really excellent name amongst our shoppers for our exceptional product or service excellent, competitive rate and also the greatest services for Top Suppliers Plastic Injection Moulding Machine Spare Parts - Pipe Joint Bypass Filter Group-BK Series – Vega Electronic, The product will supply to all over the world, such as: Madrid , Romania , Cape Town , Our products are very popular in the word, like South American, Africa, Asia and so on. Companies to "create first-class products" as the goal, and strive to provide customers with high quality products, provide high-quality after-sales service and technical support, and customer mutual benefit, create a better career and future!
By Jean from Cyprus - 2016.11.20 15:58
The sales person is professional and responsible, warm and polite, we had a pleasant conversation and no language barriers on communication.
By Octavia from United Arab emirates - 2015.07.12 12:19