EIPC5 Pompo

Tlhaloso e Khutšoanyane:

Mofuta oa pompo ea gear ea ka hare Mofuta oa EIPC5 bakeng sa lits'ebetso tsa indasteri tse nang le molumo o sa khaotseng oa phalliso Litšobotsi: • Puseletso ea ka hare ea gear e nang le axial le radial gap puseletso • Matšeliso a radial ka likarolo • Suction and pressure port radial • Tšimo ea ts'ebeliso: Hydrolic ea indasteri • Lerata le tlase • Bophelo ba nako e telele • Low pulsation (pressure pulsation ~ 2 %) • Metsoako e mengata ea phallo ka kopo Lintlha tsa Tekheniki: Rated Size 064 080 100 Spec.bophahamo ba modumo Vth [cm3/rev]*** 65,3 80,4 100,5 Tsoela pele...

Re romelle lengolo-tsoibila Khoasolla joalo ka PDF

Lintlha tsa Sehlahisoa

Li-tag tsa Sehlahisoa

Mofuta oa pompo ea gear ea kahare ea mofuta oa EIPC5 bakeng sa lits'ebetso tsa indasteri tse nang le molumo o sa khaotseng oa phallo
Litšobotsi:
• Pompo ea ka hare ea gear e nang le axial le radialpuseletso ea lekhalo
• Matšeliso a mahlaseli a nang le likarolo
• Suction le pressure port radial
• Tšimo ea kopo: Industrial hydraulic
• Lerata le tlaase
• Bophelo ba nako e telele
• Pholiso e tlase (khatello ea pulsation ~ 2 %)
• Metsoako e mengata ea phallo ka kopo
107175051
Lintlha tsa Tekheniki:

Rated Size	064	080	100
Spec.bophahamo ba modumo Vth [cm3/rev]***	65,3	80,4	100,5
Khatello e tsoelang pele ea ts'ebetso [bar]**	250
Tlhōrō ea khatello ea ho sebetsa [bar] max.10 sec 15 % potoloho ea mosebetsi **	270
Tlhōrō ea khatello [bar]**	280
Lebelo la lebitso [min-1]	100 - 2.800	100 - 2.800	100 - 2.500
Max.lebelo [metsotso-1]	3.000	3.000	3.000

Viscosity e sebetsang [mm2/s] 10 - 300

Ho qala viscosity [mm2/s]	2,000
Thempereichara ea ho sebetsa [°C]	-20 ho ea ho +100
Mokhoa oa ho sebetsa	HL – HLP DIN 51 524 karolo 1/2
Max.mocheso o mahareng [°C]	120
Min.mocheso o mahareng [°C]	-40
Max.thempereichara e tikolohong [°C]	80
Min.thempereichara e tikolohong [°C]	-40
Max.khatello ea kamohelo (lehlakore la ho noa) [bar]	2 bar e felletseng
Min.khatello ea kamohelo (lehlakore la ho noa) [bar]	0,8 bar absolute (Qala 0,6)
Weight appr.[kg]	11,5	13,0	13,5
Boemo ba ho tlhotla	Sehlopha sa 20/18/15 ka lebaka la ISO 4406
Tebello ya bophelo	eseng ka tlase ho 1x 107 mekoloko ea mojaro khahlano le khatello e phahameng ea ts'ebetso
Efficiency η vol:	94	95	95
Katleho η hm:	92	93	93
Lerata la pompo* (e lekantsoe ka phaposing ea molumo) dB[A]	69	70	71

n = 1.450 min-1 Δ p = 250 bar T = 50 °C Mahareng: HLP 46

* E lekantsoe ka phaposing ea anechoic ea Eckerle Hydraulic Division;Axial microphone sebaka sa 1.0 m
** Bakeng sa khatello e amohelehang ho 400-1.800 rpm.Rpm e eketsehileng ka kopo.
*** Ka lebaka la mamello ea tlhahiso, palo ea phalliso e ka fapana.
Lipompompo ha li na tšireletso ea kutu.The max.litekanyetso tse lumelletsoeng ha lia tlameha ho sebelisoa ka bongata.Ka kopo ikopanye le rona.

E fetileng: EIPC3 Pompo

E 'ngoe: EIPC6 Pompo