Ọkọlọtọ Injection Molding Machine-VG100
| Nkọwapụta | VG100 | ||
| A | B | ||
| NKE INJECTION | |||
| Ịghasa dayameta | mm | 35 | 38 |
| Screw La/D Ration | L/D | 20.1 | 18.5 |
| Nha agba (Theoretical) | cm3 | 135 | 158 |
| Ibu ogwu ogwu (PS) | g | 123 | 144 |
| Ọnụọgụ ịgba ọgwụ | g/s | 76 | 90 |
| Nrụgide injection | MPa | 237 | 201 |
| Ịghasa Ọsọ | rpm | 0-220 | |
| MKPỌTA UNIT | |||
| Mgbochi tonna | KN | 1000 | |
| Ọrịa strok na-emeghe | mm | 305 | |
| Oghere dị n'etiti Tie Bars | mm | 355*315 | |
| Oke.Mold Elu | mm | 320 | |
| Min.Mold Ogologo | mm | 150 | |
| Ejector Stroke | mm | 70 | |
| Ọkụ ọkụ | KN | 27 | |
| Ndị ọzọ | |||
| Nrụgide kacha | MPa | 16 | |
| Pump moto Ike | KW | 11 | |
| Ike ikpo ọkụ | KW | 5.3 | |
| Akụkụ igwe (L*W*H) | m | 3.58*1.25*1.65 | |
| Ibu igwe | t | 2.7 | |
| Ike tank mmanụ | L | 210 | |
| Akụkụ Platen Ihu |  | ||
| Oghere ebu akụkụ |  | ||
| Akụkụ igwe |  | ||
