Mesin Molding Injeksi Standar-VG100
| SPESIFIKASI | VG100 | ||
| A | B | ||
| UNIT INJEKSI | |||
| Diameter sekrup | mm | 35 | 38 |
| Screw La / D jatah | L/D | 20.1 | 18.5 |
| Ukuran Shot (Teori) | cm3 | 135 | 158 |
| Bobot injeksi (PS) | g | 123 | 144 |
| Tingkat injeksi | g/s | 76 | 90 |
| Tekanan Injeksi | MPa | 237 | 201 |
| Kacepetan meneng | rpm | 0-220 | |
| UNIT KAMPUNG | |||
| Clamp tonase | KN | 1000 | |
| Pambuka stroke | mm | 305 | |
| Spasi Antarane Tie Bars | mm | 355*315 | |
| Max.Mold Dhuwur | mm | 320 | |
| Min.Mold Dhuwur | mm | 150 | |
| Stroke Ejector | mm | 70 | |
| Ejector Tonnage | KN | 27 | |
| LAIN | |||
| Max. Tekanan Pompa | MPa | 16 | |
| Daya Motor Pompa | KW | 11 | |
| Daya Pemanas | KW | 5.3 | |
| Ukuran Mesin (L * W * H) | m | 3.58*1.25*1.65 | |
| Bobot Mesin | t | 2.7 | |
| Kapasitas Tangki Minyak | L | 210 | |
| Platen Dimensi pasuryan |  | ||
| Mold Space Dimensi |  | ||
| Dimensi Mesin |  | ||
